| Which format is the right format of cable to connect PC to epMotion? |
 |
The cable is an ethernet cable RJ 45 Crooslink cable
| Can the dispensing tool pipet concentrated HCl? |
 |
Yes.
| Can the dispensing tool pipet concentrated HCl? |
 |
Yes
| Can I use each Monitor for epBlue? |
 |
Eppendorf recommend a 19" Monitor.
| With which liquid type can I pipet DMSO? |
 |
DMSO can be pipet with the Liquid type "Alcohol 98%", see Application note 155.
| With which Liquid type can I pipet DMSO? |
 |
DMSO can be pipet with the Liquid type "Alcohol 98%", see Application note 155.
| Where can I find the current combination of labware for epMotion 5070/75? |
 |
You can find it under www.epmotion.com.
| Is it possible to work with ELISA kits on epMotion? |
 |
Yes, see Application note 138.
| Is the epMotion 5075 LH upgradable to VAC or MC version? |
 |
Yes, it is. The LH version is upgradable to VAC or MC version anytime.
| Is it possible to work with ELISA kits on epMotion? |
 |
Yes, see Application note 138.
| What is to do, if my labware is not in the labware list? |
 |
Contact your local epMotion Specialist..
| How can I change the preprogrammed liquid types? |
 |
In the parameters of a command you can find the point "Options". Under this point is the"Liquid type". Under "Liquid type" you can click on the point "Change parameter".Then you can change the preprogrammed values till you find the optical parameters for the particular liquids.
| Is it possible to upgrade epMotion 5075 Refresher 1 version to Refresher 2 version? |
 |
Yes, it's possible. Therefore you need the Software and Hardware Upgrade Set 1, Order no. 5075 851.440.
| How can I change the preprogrammed Liquid types? |
 |
In the parameters of a command you can find the point "Options". Under this point is the"Liquid type". Under "Liquid type" you can click on the point "Change parameter".Then you can change the preprogrammed values till you find the optical parameters for the particular liquids.
| How can I install a 2. client? |
 |
Please read the Userguide 016.
| Is it possible to upgrade epMotion 5070 Refreher 1 version to Refresher 2 version? |
 |
No, it isn't possible. But you have the possibility to replace the Refresher 1 device and get back a Refresher 2 version 5070 at extra charge.
| Is it possible to work with a PCR-Cooler on epMotion? |
 |
Yes, it's possible, if you work with the Thermoadapter"Frosty" Order no.5075 789.000
| Do I need an additional epBlue license to install epBlue on a second PC? |
 |
No, there is no additional license needed.
| Is it possible to work with a PCR-Cooler on epMotion? |
 |
Yes, it's possible, if you work with the Thermoadapter "Frosty" (Order no.5075 789.000).
| Where can I find the current combination of labware for epMotion 5070/75? |
 |
| How can I install epBlue on a second PC? |
 |
The epBlue package includes a CD to install epBlue on a second PC.
| Is it possible to upgrade the epMotion 5070 with a Thermomodule? |
 |
No, you can integrate Thermomodules in epMotion 5075, only.
| What is to do, if my labware is not in the labware list? |
 |
Contact POCD Scientific.
| What is to do , if the errors Ox0B10 and Ox 1986 appear after the log in? |
 |
In the name of new labware or new labware combinations are forbidden signs like §,& or others. Please, contact POCD Scientific to have that repaired.
| Where can I find the current combination of labware for epMotion 5070/75? |
 |
| Is it possible to upgrade the epMotion 5075 with a additional Thermomodule? |
 |
Yes, you can integrate up to 3 Thermomodules in epMotion 5075.
| Are the Dispensing tools autoclavable? |
 |
Yes.
| Are the Dispensing tools autoclavable? |
 |
Yes.
| Is it possible to use Tubes of other manufacturer for epMotion? |
 |
Yes, it's possible, to work with different epMotion racks in different sizes. Also it's possible to work with rack from other manufacturer, if they are in SBS format.
| What is to do, if my labware is not in the labware list? |
 |
Contact your local epMotion Specialist.
| Can the epMotion automatically pick up plates, transport material and change tools? |
 |
Yes, the epMotion 5075 can transport plates and other things, also it can change the tools automatically.. The epMotion 5070 is a semi-automatically system and not able to transport labware.
| What purpose does the optical sensor serve? |
 |
The optical sensor has three different functions. 1. To scan number of tips and kind of boxes. 2. Labware recognition on the worktable. 3. Amount of liquid in different tubes.
| Die epMotion 5075 kann es, die epMotion 5070 kann es nicht, da das Gerät nur halbautomatisch ist. |
 |
Yes, the epMotion 5075 can transport plates and other things, also it can change the tools automatically. The epMotion 5070 is a semi-automatically system and not able to transport labware.
| How many positions does the epMotion 5070 has? |
 |
The working area contains 4 positions. Also, the epMotion 5070 has 3 virtual places outside of the device (Park positions).